Setup D-LINK DIR882 Router

Items you will need to get started 

a. Laptop

b. LAN cable 

c. Access to SELF CARE 

STEP 1 :

The "BLUE" should remain connected to the MODEM

Connect one end of the LAN cable to the laptop and another to one of the port in the router "GREEN"

STEP 2: 

Open a web browser and type http://192.168.0.1 in the Address Bar

STEP 3: Enter Username and Password (case sensitive)

Username: admin 

Password: TIME<last 4 digit MAC address>  / e.g TIMEA362

Last 4 digit MAC address available underneath the router 

STEP 4 : Select WAN > Click Change Configuration.

STEP 5 : Click Connection type and Select PPPoE Dual Stack

STEP 6 : Insert PPPoE and click APPLY 

PPPoe can be obtained in SELF CARE. Click HERE for more details

Your laptop should have active internet connection now . 

NOW TO CONFIGURE YOUR WIFI SSID

Step 1: From the menu, click Wi-Fi > Basic Settings and tick Enable Wireless.

Step 2: Wireless Network Name (SSID) and Password. Like below OR any preferred passphrase (8 to 32 character). Then, click Save.

Step 3: Wireless Mode > 802.11 B/G/N mixed (2.4GHz).

Step 4: Wi-Fi Network > BlazingSpeed-TIME2.4GHz.

Key in the names you want for your WIFI & save

You are all set ! Enjoy your BLAZING SPEED